We first discuss why water could exist in the vehicle lights .
Decreases when the temperature outside and the heat began to subside headlights ( as hot as the sun or the lights turned on ) , moist air will slowly enter into the lamp housing . Air entering the house through the vent lights that are owned by each house lights to reduce stress , or it could be entered through the seals are loose or damaged .
When mica conditions slightly cooler than the air that is in the inside of the house lights , the dew point will be condensed into the mica . This is normal , because when the outside air starts to heat up as the morning dew will evaporate .
But not all such vehicles , the owners are still depending on their habits . There are many riders who prefer to park his car in the shade or moist as in the parking basement . Conditions like these can not only collect a small bit of dew point but looks more like a raindrop plus fog . After a long left murky pool water is created at the bottom of the lamp .
1. The first and easiest solution you can do is leave the headlights on when driving for several hours to remove the water point . Bigger problem if water is pooling in the bottom , the right path is removed and dried bulbs . Use some alcohol to clean up and help evaporate the residual moisture , repeat several times .
2. Dry , lay in the sun or in a warm room , can also diangin - angini . Check the air so as not to clog the hole , and replace the lamp housing correctly .
No comments:
Post a Comment