The rainy season has begun showing curahnya routines . Well , for car owners , need to pay attention to the vital parts of the vehicle that daily mobility , either to and from work or other purposes is not compromised .
Examination as condition of brakes , tire tread , and the machine becomes important . But , there is also no less important , the wipers , reservoir tube , and nozzle wiper . Because , if these components do not work perfectly of course very annoying when you are driving .
What are the three traits in poor condition ?
Rubber wiper
The signs that the rubber sweeper glass , both front and rear ( if any) , are not good , while sweeping the glass still remaining water . Or there is some sort of a line on the glass .
It indicates the condition of torn rubber or hard . Replacement process can be done alone . Most importantly, the quality of the rubber . With a tag - an- Rp150 to Rp90 thousand outlets obtained the accessories .
Cleaning Fluid
Many do not bother cleaning the glass of water on the reservoir tube . The new parts when needed attention not to wet the glass outside . Now, fill the tube with water , is also not good . Recommended blended with special wiper fluid .
While interfere , not too much because it will cause the foam on the glass and interfere with vision . The ideal size , two bottle caps mixed with 1 liter of water .
Nozzle Wiper
When the water does not come out of the nozzle , there are two possibilities . In addition to reserves in depleted reservoir tube , one more hole in the nozzle clogged dirt crust .
To clean it , it is advisable to use a sewing needle or needle pentul.Ingat , do not excessively pierced , follow the appropriate size hole. Then the direction of water can be adjusted by sliding to the left or to the right of the needle before use .
Still do not get out too , try cleaning with detergent reservoir tube . Suggested by Harrys Prasetyo , Honda mechanic , when washing off the armature from damage .
No comments:
Post a Comment