Tips Installing and Replacing Car Battery

When the battery is starts to fail, it will be a lot of problems that often arise and make the machine less stable. Especially in the case of the electrical.

One of the less favorable is the engine will not turn on. If such things happen, and the need to replace the battery, there are surefire tips that you can do without having to ask a mechanic to come to the house.

The first step is to know is how to remove the wires that must at once take removed first. If you do not want to get into trouble, disconnect the negative cable first.

Loosen the clamp bolt and binding of the negative side first and continued on the plus side. Next, lift the battery from its place vertically, so that the water does not spill battery.


Replacing Batteries

After that, reinsert the battery and also you just plug the cable again and klemnya as usual. To put it back, heed the positive pole to avoid a reaction. Next, clean the entire battery. If necessary, you can also use a liquid anti-corrosion as a precaution.


Corrosion Cable

If you find corrosion over the wires or the end of the cable, it is advisable to always clean up before installed. Because as this dirty, would be an insulator which can be a bottleneck in the energy distribution.