Saturday 22 February 2014

How jumpers car batteries

Car battery jumper when the engine is not powerful distarter easy job , easy for those who are already doing it , but the problem of its own if we 've never been and do not know how to jumper car batteries .

The car broke down or stalled amid the journey or the engine is not powerful distarter after parking , with an indication of when the big lights dim lit look or sound the horn sounded weak or dead dispido all indicators .

When the battery is weak and not strong distarter machines , we can handle it in a way jmper good car battery with another battery condition is good with a jumper or battery of another car .
Cara Jumper Aki Mobil Yang Mogok
How jumpers car batteries

How Accu Jumper Car
1 . Prepare a car battery is still good or jumpers with another car
2 . Prepare a jumper cable , select a nice jumper cables , use a jumper cable has a diameter of at least a large vein cord approx 10mm , the heat caused the cable to avoid large electric current when the starter , because the electric current when the starter can reach 120 amperes .
Jumper cables usually consist of two colors , namely black and red wires .
3 . Bring the car to another for battery jumper or jumpers , make sure the distance is long enough with jumper cables .
4 . Attach the red cable to the positive battery Vise and Clamp black on the negative battery terminal on the second battery , good battery to the battery jumper or dijumper , please refer to the picture above . Attention not to reverse the positive negative , positive to positive and negative to negative .
5 . Wait a few moments before the starter until a stun on the car battery if stun dijumper battery is completely discharged , as an example of a car that ran out of battery as long silence stun .
6 . After living car , disconnect the jumper cables one by one starting from the dijumper battery , keep the two wires do not touch each other between plus and minus cables .
7 . After the engine life , see speedo meter panel light is visible flame or dead battery , if the battery light does not mean flame battery charging system of cas dynamo ( alternator ) goes well .

But if the engine when the battery light on the dash is still alive , it means the battery charging system is in disorder , and the alternator had to be repaired , in this condition the car battery had not been charged dijumper stun charge from the dynamo or alternator .

Tips If No Jumper Cables
In emergency conditions such as no jumper cables , a step that can be done is :
1 . Borrow battery is still good , with the same physical size good shape maupn head size battery, ( battery terminal ) .
2 . Open the car battery is exhausted , attach the borrowed battery , then the starter until the car engine life .
3 . When the machine is on, disconnect the negative battery Kleman of head battery , if the machine is still alive we can proceed with the release Kleman at the positive terminal , then lift the battery and replace it with a battery that is less stun was so in charge by the alternator .

Caution : when replacing the battery when the engine make sure the two wires or battery positive and negative clamps secure is not in contact with each other or keep Kleman Plus battery is not in contact with the ground or mass .

No comments:

Post a Comment