Motorcycle brake fluid as well as motor oil or other parts , also need to be checked condition . Early use of the brake fluid is quite long , which is 1 to 2 years before it must be replaced . However , due to long term use of this most people tend to forget and lazy examined .
Chemical fluids that make up the brake fluid is a substance that can be changed due to the influence of the environment and also the temperature . At a certain temperature , the liquid can evaporate and inhibit the brake pump which can be fatal . Therefore , change your motor brake fluid if the color and consistency have changed .
Color of the brake fluid could change
To replace the brake fluid , brake master first open the lid first. Then enter the brake fluid into the tube slowly . Previously , first protect the surrounding parts of the tube with a clean cloth or rag . Because of the material body brake fluid can damage your motor .
If completed , attach the hose to the brake caliper nipple . Pump the brake handle repeatedly until it feels hard . It aims to get rid of air trapped in the tube .
Hold the handle of the brake calipers at the same nipple gently loosen up the brake fluid and the air bubbles out . Once completed tighten the screw nipelnya .
exhaust air in the tube by pumping the brake handle
Press the hose several times to remove the remaining air . Adjust the distance around the brake and then close again before checking the brake master bolt hardness in the brake master and caliper .
Immediately clean if there is fluid brake fluid dripping on the motor body with a clean or flush with clean water .
No comments:
Post a Comment