1). The first stage, of course, remove the tire first. Continued, removing the hooks lining the front using a flat-head screwdriver. By way gouged out, then pulled by hand.
2). Furthermore renggangkan brake surface using flat-head screwdriver. Insert the screwdriver into the sidelines calipers, so that the canvas is no longer attached to the disc-disc adhesion.
3). 2 Open the rear caliper bolts, using a 7 mm L key. Do not forget to remove the protective bolt also yaa ...
4). Next, remove the canvas in a way drawn to the back or attached to the caliper first, followed by the front.
5). Finally, attach the new front brake first, followed side that attaches to the rear calipers.
No comments:
Post a Comment